Horizontal Axis Wind Turbines

The Horizontal Axis Wind Turbines or HAWT house an electric generator and the main rotator shaft at the top of a tower. Both need to be pointed into the wind, for generation of electricity. A wind vane is usually enough for this purpose in the case of small turbines, but in the case of large turbines, a servo motor coupled with a wind sensor is used to point into the wind. The rotation of the blades is controlled by a gearbox which increases the rotational speed of the blades as and when required. The turbine is usually pointed in the upwind direction so as to protect it from the turbulence created by the tower. Many time€™s downwind machines are also built in a bid to combat the problem of turbulence. Such machines preclude the use of additional mechanism in order to keep the turbine in line with the wind; this is because the blades can be allowed to be bent during high winds.

Vertical Axis Wind Turbines

Vertical Axis Wind Turbines or VAWTs, have vertical alignment of the shaft. One of the most important advantages of such turbines is that there is no need for the turbine to be pointed into the wind for efficacy. These wind turbines are generally used on sites that witness a variable wind direction. A wind force from any direction can be used by Vertical Axis Wind Turbines.
The presence of vertical axis means that the both the gearbox and the generator can be placed near ground as there is no need for the tower to offer it support. This also means that the gearbox and the generator are accessible when it comes to the maintenance of the wind turbines.

Wind Turbines – Design and Construction

It is the job of the wind turbines to exploit the wind energy existing at a particular location. Designers and builders use the aerodynamic modeling for the determination of the various control systems to be used, number of blades, shapes of the blade, and the optimum height of the tower.
The modern wind turbine is primarily used for conversion of wind energy into electricity energy. In accordance with this purpose, the wind turbine has three major components, namely the rotor component, the generator component, and the structural component. Almost 20% of the cost of the wind turbine is taken up by the rotor component, while an approximate 34% of the cost is consumed by the generator component. 15% of the cost of the wind turbine is taken up the structural component.

These days’ environmental activists are championing the use of wind turbines, for the production of electricity as they are environment friendly and if at all, release only a minimal amount of pollutants.

Windmill Plans Blogs

• Study: Electricity Production From Algae Negates Carbon Release …
• Build Your Own Wind Turbine
• Sandra Rose – Does Your Grandmother Look This Hawt?
• Integrating variable energy resources to the electric power grid …
• UrduMaza.com Blog » CNG stations closure to enhance electricity …

It is definitely your best bet, before setting out to build wind turbines, to purchase a windmill plans and instruction manuals or guides to follow. Remember that you get what you pay for when it comes to instructions. Make sure you find a manual and windmill plans that is easy to read with detailed instructions. There are also many online resources and forums to help guide you through your windmill building process.

To familiarize yourself with the basics, before you get started on your project to build windmills, there are four basic components to wind generators. To build wind generators you must be familiar with the towers, the batteries, the turbines and the tail and propeller assembly. The tools generally required to build windmills are simple as well, you will need wrenches, a saw and a drill. There may also be a need for additional tools depending on how of the wind turbine you will be building yourself.

One part that you will probably be ordering when you decide to build windmill is the motor. The motors on wind generators do require regular maintenance and oiling for continued efficiency, but this is a small price to pay for the excellent energy these systems provide. In addition to the motor, you are definitely going to need a good-sized workspace. Depending on your target energy output, your propellers or blades could get up to 8 feet in diameter (4 ft blades).

It takes a little work to build windturbines, but there is really nothing overly complicated about the process and generally the process can be fairly inexpensive once you are operational and your electric bills are dropping each month. Building windmills is also a fast growing occupation worldwide as technicians are tough to find. So learn how to build windmill for yourself and take advantage of the opportunities free electricity and know how can provide.